News classification
Contact us
- Add: Jiangsu province Wuxi City New WU District
- Tel: 0510-81819749
- Fax: 0510-81819749-9
- Email: gc1718@163.com
The processing method of jump number of Wanhao projector
Reasons for the number of hops of Wanhao projector:
(1) In the factory environment, some workshops have equipment with large vibration, such as punches, which often makes the last two digits of projector data skip.
(2) The wiring in some factories is often not standardized, and the grounding of equipment is poor. It will cause large electrical interference, and will also cause the projector to jump.
(3) The projector has been used for a long time. Mori Qian found that some instruments have been used for more than 10 years. The circuit of this instrument is seriously aging, and some capacitors and other components cannot filter well. The number of hops caused by interference is serious.
The processing method of jump number of Wanhao projector
Overview: Wanhao projector is a precise and efficient measuring instrument integrating light, machinery and electricity. The workpiece image of the vertical projector can be either full image or inverted image, and the measurement is simple and intuitive, with high efficiency. The instrument has excellent optical quality, clear objective lens and accurate magnification.
Wanhao projectors are widely used in institutions, research institutes and metrological verification departments of machinery, instrumentation, electronics, light industry and other industries. It can efficiently detect the contour size and surface shape of various complex workpieces, such as templates, stamping parts, cams, threads, gears, forming cutters, etc.
Wanhao projector has compact structure, simple and beautiful appearance, economical and practical, good reliability, and coordinate indication error can reach (3+L/75) μ m. It can effectively measure and compare the workpiece directly, such as stamping parts, gears, threads, cutters, etc. It has been widely used in machinery manufacturing, electronics, molds, instruments and watches and other industries.
Reasons for the number of hops of Wanhao projector:
(1) In the factory environment, some workshops have equipment with large vibration, such as punches, which often makes the last two digits of projector data skip.
(2) The wiring in some factories is often not standardized, and the grounding of equipment is poor. It will cause large electrical interference, and will also cause the projector to jump.
(3) The projector has been used for a long time. Mori Qian found that some instruments have been used for more than 10 years. The circuit of this instrument is seriously aging, and some capacitors and other components cannot filter well. The number of hops caused by interference is serious.
The processing method of jump number of Wanhao projector:
(1) . Shockproof platform shall be set up where there are punch machines and other equipment. Rubber block can be placed under the projector; It can also be far away from vibration sources such as punch press.
(2) Connect the projector to the ground wire and the electric equipment to the ground effectively.
(3) The instrument with serious aging needs to be replaced with a new DC3000 digital display meter.
