Measuring projector maintenance

1, measuring projector should be placed in a clean and dry room ( room temperature 20± 5 ℃, humidity below 60% ), to avoid optical parts surface fouling, metal parts rust, dust and debris falling into the guide rails, effect of measuring projector performance.

2, measuring projector is used, the working surface should be clean, the best and then cast dust cover.

The drive mechanism 3, measuring projector and motion, should the lubricating oil regularly, make the mechanism movement is smooth, maintain good state.

Table 4, glass and paint surface is dirty, can use a neutral detergent wipe clean with clear water. Never to use organic solvents to clean the paint surface, otherwise, will make the paint surface loses luster.

Life 5, measuring projector LED light source is very long, but when the bulb is burnt out, please inform our company, replaced by Haibo Photoelectric Technology Co., Ltd. professionals for you.

6, measuring projector precision parts, such as image system, working table, optical encoder and Z axis drive mechanism required precision alignment, all adjusting screws and fastening screws are fixed, the customer do not disassemble, if has the question please inform our company address.

7, the software has been on the bench and optical ruler error were accurate compensation, please do not change. Otherwise, will produce erroneous measurement results.

8, measuring projector all electrical connector, generally do not unplug, as has been pulled out, it must be based on the labeled correctly insert and tighten the screws. Incorrect insertion, light will influence the measuring projector function, heavy may damage the system.

无锡市森乾机械量仪有限公司专业经营万濠投影仪，万濠全自动影像仪,万濠影像测量仪。提供完善的售前售中和售后服务。