Method of measuring projector bulb replacement

The following method of measuring projector bulb replacement:

1 turn off the power switch on the front panel of the measuring projector;

2 unplug the power line measuring projector;

3 open the measuring projector on the right side of the door;

The 4 release measuring projector gate opposite screw loosening, remove downwards lamp holder assembly.

5 measuring projector lamp holder assembly extraction projector from the door;

6 sheared by 2 connecting line. And the worst holder out.

7 install a new lamp holder, locking screws two lamp holder.

8 mounted on the lamp filament, guarantee level, adjust the lighting in the mirror position. The filament light bulb filament overlap and mirror imaging.

The 9 locking socket.

10 the connection socket group on the ground, and wrapped with insulation.

11 lamp group from a small door back projector.

12 boot detection.

Be careful.

Re-install measuring projector lamp holder, must adjust the lighting position.

To ensure that looking down from the bulb. The filament light bulb filament overlap and mirror imaging.

Then the whole assembly of Ho projector lamp.

无锡市森乾机械量仪有限公司专业经营万濠投影仪，万濠全自动影像仪,万濠影像测量仪。提供完善的售前售中和售后服务。