Tool setting outside the machine can shorten the downtime of the machine tool, so as to obtain a richer long-term return. Many processing workshops are reluctant to spend money on tool presetters (commonly known as tool setting instruments) because they are not processing equipment and cannot directly create economic benefits. However, in fact, compared with touching the tool on the machine tool or using the automatic tool measurement system of the machine tool, the tool presetting instrument can shorten the downtime of the machine tool and obtain a richer long-term return. The precision of the presetter is complex. Obviously, you want the presetter to have high accuracy, but its repeatability is more important. In many cases, the accuracy of the machine tool is not necessarily very high, but its repeatability is very good. When you compare the zero point (origin of coordinate system) with a machine tool, its accuracy relative to the physical coordinate system decreases, but you can indeed improve the accuracy of this machine tool.

Tool setting instrument use:

1. The equipment is mainly used for sawing I-steel, channel steel, angle steel, H-steel and various profiles to meet the continuous 24-hour production operation.

2. The equipment adopts hydraulic and electrical centralized control, with stable performance. It can rotate at any angle between 0 ° ~45 ° and can be set manually.

3. The equipment is equipped with a free mobile combined positioning saw blade protection arm to increase the rigidity of the saw blade, ensure the sawing accuracy and extend the service life of the saw blade.

4. The machine bed and saw frame have good rigidity, no deformation, and corresponding stress relief and heat treatment processes; Narrow sawing gap saves materials.

5. The components are of good quality and high reliability to ensure the stability and reliability of the cycle process of the machine tool; The feed adjustment is hydraulic stepless adjustment, and the regulating valve shall be linear, safe and reliable.

6. The equipment is tensioned automatically by hydraulic pressure, and the equipment transmission is worm and worm transmission (transmission structure is simple, not easy to be damaged, and convenient for maintenance).

7. The cutting accuracy of the equipment meets the national standards and relevant industrial requirements.

8. In addition to the general protective cover, the equipment shall be equipped with a safety inspection device on the driven wheel and the tensioning mechanism. When the saw blade is stuck, broken or the equipment saw wheel slips, the device can send a detection signal to stop the equipment to ensure the safety of the machine tool and personnel.

9. When the equipment is finished sawing, it will stop automatically and raise the saw frame automatically.