Wanhao comprehensive data projector

Use:

Wanhao projectors are widely used in machinery, instrument verification department for measurement, electronics, light industry, college, research institute. Can effectively detect various complex shape of the workpiece contour size and shape of the surface, such as a template, stamping parts, cam, screw thread, gear shaping cutter, etc..

Technical parameters:

1, precision: 3+L/75 μ m (L for the measured length, unit: mm

2, the rotation angle display resolution: 1 'or 0.01 °

3, the projection rotation range: 0~360 °

4, projection screen size: 312mm in diameter, using range > 300 engraved with the M word line)

5, the instrument of power: 110V/220V (AC) 50/60Hz total power 400W

Operation steps:

1, check:

1.1 carefully check the power line is connected firmly.

1.2 check the stage along the X axis, Y axis movement is smooth, not smooth, in the slide rail and where the rub add lubricating oil.

1.3 according to the selection of different measuring mirror times the size (the workpiece can choose small magnification can choose high magnification, the workpiece).

Whether the 1.4 check the light switch is in the closed state, all fixed screw is in a locking state can.

2, boot:

2.1 turn on the power, press the "POWER" button

2.2 select light source (to observe the surface of workpiece can choose the surface light, to observe the contour can be selected contour light), the rotary adjusting strength.

2.3 boot and observe the digital meter has no abnormal phenomena, such as abnormal should be immediately cut off the power

The 3 part, operation:

3.1: installation of the workpiece will be installed or workpiece is placed on a stage, and to be placed just below the fold mirror.

3.2 focus: watching the projection screen, while focusing handwheel rotating projector below right, until the workpiece into phase

Clear

3.3 pairs of reference: to the workpiece into the side (or collection) and any screen lines coincide or parallel.