Daily maintenance of Wanhao projector

Daily maintenance of Wanhao projector includes the following:

1, Wanhao projector should be placed in a clean and dry room ( room temperature 20± 5 ℃, humidity below 60% ), to avoid optical parts surface fouling, metal parts rust, dust and debris falling into the guide rails, Wanhao projector performance impact.

2, Wanhao projector is used, the working surface should be clean, the best and then cast dust cover.

The drive mechanism 3, Wanhao projector and motion, should the lubricating oil regularly, make the mechanism movement is smooth, maintain good state.

Table 4, glass and paint surface is dirty, can use a neutral detergent wipe clean with clear water. Never to use organic solvents to clean the paint surface, otherwise, will make the paint surface loses luster.

Life 5, Wanhao projector LED light source is very long, but when the bulb is burnt out, please inform our company, replaced by Haibo Photoelectric Technology Co., Ltd. professionals for you.

6, Wanhao projector precision parts, such as image system, working table, optical encoder and Z axis drive mechanism required precision alignment, all adjusting screws and fastening screws are fixed, the customer do not disassemble, if has the question please inform our company address.

7, the software has been on the bench and optical ruler error were accurate compensation, please do not change. Otherwise, will produce erroneous measurement results.

8, Wanhao projector all electrical connector, generally do not unplug, as has been pulled out, it must be based on the labeled correctly insert and tighten the screws. Incorrect insertion, light will influence the Wanhao projector function, heavy may damage the system.